-
-
At this point you need to consult the user manual included in your laser upgrade kit to install the software and connect to the laser
-
When setting the focus of the laser, the distance between the laser lense and workpiece should be 40mm.
-
The focus of the laser is set by turning the the black lense holder at the bottom of the laser
-
Cancel: I did not complete this guide.
One other person completed this guide.
One Comment
I bought my 2.5w Cron secondhand. The laser used to work perfectly. Then sundenly it is not burning into the wood. the file I used I have engraved before, the light showes on the wood, but it is not burning. What can be the problem?
