Changes to Step #12
Edit by Paul Cronje —
Edit approved by Paul Cronje
- Before
- After
- Unchanged
Step Lines
| + | [title] Route the cables |
|---|---|
| + | [* 2] Route the cables through the right gantry as shown in the pictures. First tighten them with a cable tie to the top motor bracket. |
| + | [* 5] Add the cables of the two stepper motors to the harness and tighten the harness to the back of the right gantry as shown in the pictures. |
| + | [* 1] Make sure the cables are not touching the GT2 belt. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added