01. Mount toggle switch

Written By: Paul Cronje (and one other contributor)
  • Comments: 1
  • Favorites: 0
  • Completions: 4

Difficulty

Easy

Steps

4

Time Required

00:05:00

Sections

1

Flags

0

  1. Toggle Switch Assembly

    • Toggle Switch Assembly

    • 2 pcs M4x12 Cap Screw

    • 2 pcs M4 Lock Nuts

    Edit

  2. Small Flat Screw Driver

    • Small Flat Screw Driver

    • No 7 Spanner

    • 3mm Allen Key

    Edit

  3. Mount the toggle switch assembly onto the bottom of the front plate of the CNC machine as shown Use the 2 pcs M4x12 cap screws and M4 lock nuts for this step

    • Mount the toggle switch assembly onto the bottom of the front plate of the CNC machine as shown

    • Use the 2 pcs M4x12 cap screws and M4 lock nuts for this step

    Edit

  4. Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop

    • Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop

    Edit
Finish Line

4 other people completed this guide.

Author

with 1 other contributor

Paul Cronje

Member since: 10/05/2018

6,123 Reputation

46 Guides authored

One Comment

Done………………..

Francois Maritz - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 18

All Time: 2,647