You're viewing the latest revision of this guide.

Older
Mar 29, 2019 - 04:03:13
Mar 29, 2019 - 04:03:13 Mar 25, 2019 - 01:03:45 Mar 20, 2019 - 01:03:50 Mar 20, 2019 - 01:03:12 Dec 11, 2018 - 11:12:33 Dec 11, 2018 - 11:12:21 Dec 07, 2018 - 08:12:40 Dec 07, 2018 - 08:12:52 Dec 07, 2018 - 08:12:29 Dec 07, 2018 - 08:12:23 Dec 07, 2018 - 08:12:34 Dec 07, 2018 - 08:12:46 Dec 07, 2018 - 08:12:03 Dec 07, 2018 - 07:12:19
Newer

01. Mount toggle switch

Written By: Paul Cronje (and one other contributor)
  • Comments: 1
  • Favorites: 0
  • Completions: 4

Difficulty

Easy

Steps

4

Time Required

00:05:00

Sections

1

Flags

0

  1. Toggle Switch Assembly

    • Toggle Switch Assembly

    • 2 pcs M4x12 Cap Screw

    • 2 pcs M4 Lock Nuts

  2. Small Flat Screw Driver

    • Small Flat Screw Driver

    • No 7 Spanner

    • 3mm Allen Key

  3. Mount the toggle switch assembly onto the bottom of the front plate of the CNC machine as shown Use the 2 pcs M4x12 cap screws and M4 lock nuts for this step

    • Mount the toggle switch assembly onto the bottom of the front plate of the CNC machine as shown

    • Use the 2 pcs M4x12 cap screws and M4 lock nuts for this step

  4. Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop

    • Connect the short red cable (centre pin on toggle switch) to the orange side (normally closed) on the E-Stop

Author

with 1 other contributor

Paul Cronje

Member since: 10/05/2018

6,123 Reputation

46 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 8

All Time: 2,698