01. Y-axis Wheel Assembly

Left Y-carriage plate

Right Y-carriage plate

V-Wheel Kit (8 Pcs)

Eccentric Nut (4 Pcs)

3mm Allen Key

No. 8 Spanner

No. 10 Spanner

Press the bearing into the delrin V-wheel

Place the washer into the centre of the V-wheel

Press the second bearing into the other side of the V-Wheel

Insert the M5x35 screw through the bearings

Mount 4 V-wheels to the holes circled in RED with the spacers and locknuts in the V-wheel kits

Make sure the V-wheels can turn easily

Mount 4 V-wheels to the holes circled in YELLOW with the eccentric nuts instead of the aluminium spacers.

Make sure the notch on the eccentric nut faces away from the fixed V-wheel

Check if the V-wheels can turn easily

Slide the 20x40 V-slot profile in between the V-wheels

Turn the eccentric nuts with the No.10 spanner to eliminate the play between the V-wheels and the aluminium profile

Ensure the V-wheels are still fastened and can turn easily

Remove the aluminium profile