02. Y-Axis Motor Assembly

Left Y-axis Rail Assembly

Right Y-axis Rail Assembly

Y-Motor Plate (2 Pcs)

Standoff, M3x18, Female-Female (8 Pcs)

M3x8 Cap Screw (24 Pcs)

M3 Washer (16 Pcs)

Y-Motor (2 Pcs)

GT2 Pullay, 16 teeth (2 Pcs)

1.5mm Allen Key

2.5mm Allen Key

Pratley Pratlock (Included in kit)

Sharp Nose Pliers

Place motors as shown in picture

Place Y-motor plates as shown in picture

Mount motors to motor plates with M3x8 cap screws (8 Pcs), M3 washers (8 Pcs) and Pratley Pratlock by using the 2.5mm Allen Key

Mount the M3x18 standoffs (8 Pcs) with the M3x8 cap screws (8 Pcs), M3 washers (8 Pcs) and Pratley Platlock in the holes as indicated

Hold the standoff with the sharp nose pliers while tighting the M3 cap screw with the 2.5mm Allen Key

Fix the GT2 pulleys (2 Pcs) to the motor shafts with the thin flanch facing towards the motor

Tighten the grub screws with the 1.5mm Allen Key

Place the left and right Y-Motor rails as shown

Place the Y-Motor assemblies as shown

Mount the Y-motor assemblies to the Y-motor rails with the M3x8 cap screws (8 Pcs), M3 washers (8 Pcs) and Pratley Pratlock through the holes indicated